Connecting up Connecting the speakers The receiver will work with just two stereo speakers (the front speakers in the diagram) but using at least three speakers is recommended, and a complete setup is best for surround sound. To achieve the best possible surround sound, install your speakers as shown below. 5.1 channel surround system: L – Front Left C – Center R – Front Right R SL – Surround Left SR – Surround Right L SW – Subwoofer After installing the speakers, connect them as shown below. VSX-824 SW C English SR SL Connecting the speaker cables Make sure you connect the speaker on the right to the right (R) terminal and the speaker on the left to the left (L) terminal. Also make sure the positive and negative (+/–) terminals on the receiver match those on the speakers. 1 2 3 1 Twist exposed wire strands together. Loosen terminal and insert exposed wire. Tighten terminal. 2 10 mm LINE LEVEL INPUT 3 Subwoofer (SW) Front Right (R) Center (C) Front Left (L) CAUTION • Before making or changing connections, switch off the power and disconnect the power cord from the AC outlet. • These speaker terminals carry HAZARDOUS LIVE voltage. To prevent the risk of electric shock when connecting or disconnecting the speaker cables, disconnect the power cord before touching any uninsulated parts. Connect the center and surround speaker terminals of VSX-424/VSX-329 as shown below: 1 2 3 Twist exposed wire strands together. Push open the tabs and insert exposed wire. Release the tabs. 1 10 mm Surround Right (SR) Surround Left (SL) 2 3 2 The type of center and surround speaker terminals for VSX-424/VSX-329 is different from this diagram. You can use speakers with a nominal impedance between 6 W and 16 W.
Download PDF fil