Easy Setup Guide SBX-N700/SBX-N500 Installation/Preparation and Settings .) Before installing and setting up the unit, make sure you have all of the accessories ( Page 6 of Operating Instructions Connect the power cords to an outlet after you have nished all of the connections. Connecting to your TV, player, and other devices Connecting to an ARC-compatible TV Connect to your TV using an HDMI cable (commercially available). Connect to the ARC HDMI input terminal on your TV. HDMI IN ARC Connecting to the network For details, refer to pages 21 to 23 of the Operating Instructions Connecting to the network via the LAN port You can connect to a local area network (LAN) from the LAN port on the rear of the unit. For details, refer to the operating instructions for your network device. Use a LAN cable to connect the LAN port of the unit to the LAN port of your modem or router. For the LAN cable, use a straight cable with RJ45 connectors that is compliant with category 5 (CAT5) or higher. Broadband service Connecting the power cord . Connect the power cords of the AV speaker bar and wireless subwoofer (SBX-N700 only) to an outlet. TV Check whether your TV is ARC compatible. Check whether your TV settings need to be set. Preparing the remote control Router HDMI cable Insert the supplied batteries (AAA x2). Insert the batteries as indicated by the marks in the battery compartment. Insert the negative end () first. DVD player, etc. IR OUT OPT IN 1 (TV) OPT IN 2 LAN(10/100) HDMI OUT(ARC) Rear View Computer LAN(10/100) Computer * ARC (Audio Return Channel) : This is a function that enables output of the TV audio from the unit by connecting only the HDMI cable. Rear of unit IR OUT OPT IN 1 (TV) OPT IN 2 LAN(10/100) HDMI OUT(ARC) AC IN Connecting to a TV that is not ARC compatible Connect to your TV using an HDMI cable (commercially available). To enable hearing of the TV audio with the unit, connect the supplied optical digital audio cable. OPTICAL OUT Connecting wirelessly You can use an access point or wireless router to connect the unit to the network via a wireless LAN. For details on connecting and the network settings, refer to the operating instructions for your access point or wireless router. Front of unit Pressing the [STANDBY/ON] button Con rm that "PIONEER" is displayed on the display window of the AV bar. TV HDMI IN Wireless communication Computer Access point or wireless router SBX-N700 only Confirm that the CONNECT indicator on the wireless subwoofer lights blue. * If the CONNECT indicator on the wireless subwoofer does not light blue, perform pairing. For details, refer to page 52 of the Operating Instructions . Remove the protection cap at the end and then connect the cable while paying attention to the orientation of the connector. Optical digital audio cable (supplied) DVD player, etc. IR OUT OPT IN 1 (TV) OPT IN 2 HDMI cable LAN(10/100) HDMI OUT(ARC) Broadband service Optical digital audio cable (commercially available) Rear View Please also read the instructions on the back side.
Download PDF fil